Dodge Charger 2011-2022   ( LD )

The main Appcar DiagFCA features:
  • Read and clear DTC Fault codes
  • Read ECUs identification data
  • Read modules real-time data
  • Read vehicle configuration data
  • Edit / code vehicle configuration data
  • System tests / actuators
  • Perform calibration and adaptation routines
  • Build DTC fault codes and vehicle configuration reports

The support level, available modules and procedures may vary depending on the year and vehicles trim level.
 

⚠️ There are two CAN networks CAN-C and CAN-IHS in this vehicle.
To connect to modules in a CAN-IHS, you need a specific interface or an additional cross adapter.
👉 Read more how to connect to the specific CAN-bus
⚠️ 2018+ Dodge Charger is equipped with a Security Gateway Module (SGW). For active diagnostics and coding it is necessary to use an additional SGW Bypass Cable!

Supported Modules

ABS Anti Lock Brakes
ACC Adaptive Cruise Control
ADCM Active Damping Control Module
AFLS Adaptive Front Lighting System
AMP Amplifier
BCM Body Controller
BSM Blind Spot Module
CSWM Comfort Seat Wheel Module
DDM Driver Door Module
DTCM Drive Train Control Module
EPS Electric Power Steering
ESL Electronic Steering Lock

ESM Electronic Shifter
FFCM Forward Facing Camera Module
HFM Hands Free Module (cell phone)
HSM Heated Seat Module
HVAC Heat, Ventilation and A/C
ICS Integrated Center Stack
IPC Instrument Panel Cluster
ITM Intrusion
LBSS Left Blind Spot Sensor
MSM Memory Seat Module
ORC Occupant Restraint Air Bag

PCM Powertrain Control Module
PDM Passenger Door Module
PTS Parktronics
RADIO Radio
RBSS Right Blind Spot Sensor
RFH Radio Frequency Hub
SCCM Steering Column Control Module
SGW Security Gateway Module
TCM Transmission Control Module
TGW Telematic Gateway Radio
TPM Tire Pressure Monitor

Supported Procedures and Routines

ABS Initialize
ABS Bleed Brakes
ACC Calibration / Auto Alignment
EPS Clear Steering Pull Compensation
FFCM VIN Reset
HVAC Actuator Calibration
IPC Self Test
IPC Seat Belt Minder Enable / Disable
MSM Seat Calibration
ORC Initialize
PCM Learn ETC - Throttle / Accelerator Pedal calibration
PCM Cam Crank Relearn

RFH Door Handle Verification Test
RFH Locate Learned Keys
RFH Immobilizer Antenna Test
RFH Clear TPM Sensor Rolls Test Results
RFH Rolls Test
RFH Program Ignition FOBIKs (2011-2017, PIN Code is required!)
RFH Erase Ignition FOBIKs (2011-2017, PIN Code is required!)
RFH Read PIN Code (2011-2014 only)
TCM NAG1 Initialize EGS
TCM NAG1 Store Learned Adaptives
TCM NAG1 Reset Learned Adaptives
TCM NAG1 EGS Configuration Edit
TPMS sensor # ID
ZF 8HP Quick Learn

Auto Headlamp On/Off Thresholds
Combined Rear Lights - EU/US Conversion
Front Fog Lamps Dropuot
Rear Fog Lights Configuration
Mirrors Configuration
TPMS Enable / Disable

Vehicle Configuration Parameters

500+ editable BCM configuration parameters