Dodge Viper 2013-2017   ( ZD )

The main Appcar DiagFCA features:
  • Read and clear DTC Fault codes
  • Read ECUs identification data
  • Read modules real-time data
  • Read vehicle configuration data
  • Edit / code vehicle configuration data
  • System tests / actuators
  • Perform calibration and adaptation routines
  • Build DTC fault codes and vehicle configuration reports

The support level, available modules and procedures may vary depending on the year and vehicles trim level.
 

⚠️ There are two CAN networks CAN-C and CAN-IHS in this vehicle.
To connect to modules in a CAN-IHS, you need a specific interface or an additional cross adapter.
👉 Read more how to connect to the specific CAN-bus

Supported Modules

ABS Anti Lock Brakes
ADCM Active Damping Control Module
AMP Amplifier
BCM Body Controller
DDM Driver Door Module
HVAC Heat, Ventilation and A/C

ICS Integrated Center Stack
IPC Instrument Panel Cluster
OCM Occupant Classification
ORC Occupant Restraint Air Bag
PCM Powertrain Control Module

PDM Passenger Door Module
RADIO Radio
RFH Radio Frequency Hub
SCCM Steering Column Control Module
TPM Tire Pressure Monitor

Supported Procedures and Routines

ABS Initialize
ABS Bleed Brakes
HVAC Actuator Calibration
IPC Self Test
IPC Seat Belt Minder Enable / Disable
ORC Initialize
PCM Learn ETC - Throttle / Accelerator Pedal calibration
PCM Cam Crank Relearn

RFH Door Handle Verification Test
RFH Locate Learned Keys
RFH Immobilizer Antenna Test
RFH Clear TPM Sensor Rolls Test Results
RFH Rolls Test
RFH Program Ignition FOBIKs (2013-2014)
RFH Erase Ignition FOBIKs (2013-2014)
RFH Read PIN Code (2013-2014)
TPMS sensor # ID
ZF 8HP Quick Learn

Auto Headlamp On/Off Thresholds
Combined Rear Lights - EU/US Conversion
Front Fog Lamps Dropout
Seat Belt Minder Enable/Disable
Headlamps Configuration

Vehicle Configuration Parameters

500+ editable BCM configuration parameters