Jeep Grand Cherokee 2011-2013   ( WK2 )

The main Appcar DiagFCA features:
  • Read and clear DTC Fault codes
  • Read ECUs identification data
  • Read modules real-time data
  • Read vehicle configuration data
  • Edit / code vehicle configuration data
  • System tests / actuators
  • Perform calibration and adaptation routines
  • Build DTC fault codes and vehicle configuration reports

The support level, available modules and procedures may vary depending on the year and vehicles trim level.
 

UK / RHD / European model and 3.0 diesel are also supported.

Supported Modules

ABS Anti Lock Brakes
ACC Adaptive Cruise Control
ADCM Active Damping Control Module
AHBM Automatic High Beam
AHLM Headlamp Leveling
AMP Amplifier
ASCM Air Suspension Control Module
BSM Blind Spot Module
CCN Instrument Cluster / Cabin Compartment Node
DMFL Door Module Front Left
DMFR Door Module Front Right

DTCM Drive Train Control Module
ELSD Electronic Limited Slip Differential
EPS Electric Power Steering
ESM Electronic Shifter
HFM Hands Free Module (cell phone)
HSM Heated Seat Module
HVAC Heat, Ventilation and A/C
ITM Intrusion
MSMD Memory Seat
ORC Occupant Restraint Air Bag
PCM Powertrain Control Module

PEM Passive Entry Module
PLGM Power Liftgate
PTS Parktronics
RADIO Radio
SAS Steering Angle Sensor
SDARV Satellite Video Receiver
TCM Transmission Control Module
TIPMCGW Central Gateway
TPM Tire Pressure Monitor
VES3 Last Row Screen
WCM Wireless / Ignition Control

Supported Procedures and Routines

ABS Bleed Brakes
ABS Initialize
ACC Auto Alignment
ACC Auto Alignment (VIN Reset)
ASCM - Air Susp Calibration - Write Height Values
ASCM - AirMass Readings
ASCM - Deflate Spring to Atmosphere
ASCM - Deflate Spring to Reservoir
ASCM - Fill Spring from Reservoir
ASCM - Pressure Readings
CCN Self Test
CCN Settings (units, lang)
DTCM Reset Adaptives
DVD VES - DVD Region Change Flag Reset
ELSD Quicklearn
ELSD System Test
HVAC Actuator Calibration
PCM Learn ETC - Throttle / Accelerator Pedal calibration (gasoline)
PCM IMA Codes 6 Cyl (diesel)
PCM Manual DPF Regeneration (diesel)
PCM Cam Crank Relearn (gasoline)
PCM Replace Routine
PCM VIN Edit (gasoline)

545RFE Transmission Clear Learned Variable Line Pressure (VLP) Counters - Shift Count In Open Loop
545RFE Transmission Clear Learned Variable Line Pressure (VLP) Counters - Open Loop Output Tooth Count
545RFE Transmission Quick Learn
MyGIG Radio - DVD Region Change Flag Reset
MyGIG Radio - HDD Backup
MyGIG Radio - 12/24h Clock Mode (EU market only)
MyGIG Radio - Anti-Theft CODE temporary disable
TPMS Sensor ID
PEM Door Handle Verification Test
PEM LF Antenna Verification Test
PEM Locate Learned Keys
PEM Replace Routine
TCM NAG1 Initialize EGS
TCM NAG1 Store Learned Adaptives
TCM NAG1 Reset Learned Adaptives
TCM NAG1 EGS Configuration Edit
WCM Erase All Ignition Keys
WCM Program Ignition Keys or Key FOBs
WCM Reset WIN Configuration
WCM Replace
WCM PIN Reset (2012+)
WCM VIN Reset (2012+)
WCM Read PIN Code
Remote Start Abort Reason #
Remote Start Inhibit Reason #
Anti-Theft VTA Alarm Trigger Cause #

Seat Belt Minder Enable/Disable
Headlamps Configuration
Mirrors Configuration
Tip Start
Door Lock/Unlock Configuration
Accessory Delay Time
Headlamp Delay Time
Illuminated Approach Time
Flash Lamps on Lock
Wipers Settings
Horn Chirp Configuration
Compass and Temperature Display
Remote Steering Wheel Switches
DRL Configuration
Tire Size - Tire Circumference
Front Fog Lamps Dropout
Front Fog Lamps Enabled/Disabled
Combined Rear Lamps
Rear Back-up Camera
One Touch Lane Change
Anti-Theft VTA Alarm Configuration
TPMS Tire Pressure Monitoring Enabled/Disabled
DVD Region Code
Tilt Mirrors in Reverse

Vehicle Configuration Parameters

200+ editable TIPMCGW configuration parameters