Jeep Grand Cherokee 2014-2022   ( WK2 )

The main Appcar DiagFCA features:
  • Read and clear DTC Fault codes
  • Read ECUs identification data
  • Read modules real-time data
  • Read vehicle configuration data
  • Edit / code vehicle configuration data
  • System tests / actuators
  • Perform calibration and adaptation routines
  • Build DTC fault codes and vehicle configuration reports

The support level, available modules and procedures may vary depending on the year and vehicles trim level.
 

⚠️ There are two CAN networks CAN-C and CAN-IHS in this vehicle.
To connect to modules in a CAN-IHS, you need a specific interface or an additional cross adapter.
👉 Read more how to connect to the specific CAN-bus
⚠️ 2018+ Jeep Grand Cherokee is equipped with a Security Gateway Module (SGW). For active diagnostics and coding it is necessary to use an additional SGW Bypass Cable!

UK / RHD / Europe model and 3.0 diesel are also supported.

Supported Modules

ABS Anti Lock Brakes
ACC Adaptive Cruise Control
ADCM Active Damping Control Module
AFLS Adaptive Front Lighting System
AMP Amplifier
ANC Active Noise Cancelation
ASCM Air Suspension Control Module
BCM Body Controller
CSWM Comfort Seat Wheel Module
DDM Driver Door Module
DSM Display Screen Module
DTCM Drive Train Control Module
DTV Digital Television

EAM Emergency Assistance Module
EDM External Disc Module
ELSD Electronic Limited Slip Differential
EPS Electric Power Steering
ESM Electronic Shifter
FFCM Forward Facing Camera Module
HSM Heated Seat Module
HVAC Heat, Ventilation and A/C
ICS Integrated Center Stack
IPC Instrument Panel Cluster
ITM Intrusion
LBSS Left Blind Spot Sensor
MSM Memory Seat Module
ORC Occupant Restraint Air Bag

PCM Powertrain Control Module
PDM Passenger Door Module
PLGM Power Liftgate
PTS Parktronics
RADIO Radio
RBSS Right Blind Spot Sensor
RFH Radio Frequency Hub
SCCM Steering Column Control Module
SGW Security Gateway Module
TCM Transmission Control Module
TPM Tire Pressure Monitor
VES2 Second Row Screen
VES3 Last Row Screen

Supported Procedures and Routines

ABS Initialize
ABS Bleed Brakes
ACC Auto Alignment
ACC Auto Alignment (VIN Reset)
ASCM - Air Susp Calibration - Write Height Values
ASCM - AirMass Readings
ASCM - Deflate Spring to Atmosphere
ASCM - Deflate Spring to Reservoir
ASCM - Fill Spring from Reservoir
ASCM - Pressure Readings
DTCM Reset Adaptives
ELSD Quicklearn
ELSD System Test
EPS Clear Steering Pull Compensation
FFCM VIN Reset
HVAC Actuator Calibration
IPC Self Test
IPC Seat Belt Minder Enable / Disable
MSM Seat Calibration
ORC Initialize
PCM Learn ETC - Throttle / Accelerator Pedal calibration
PCM Cam Crank Relearn
PCM IMA Codes 6 Cyl (3.0 VM diesel)
PCM Manual DPF Regeneration (3.0 VM diesel)

RFH Door Handle Verification Test
RFH Locate Learned Keys
RFH Immobilizer Antenna Test
RFH Clear TPM Sensor Rolls Test Results
RFH Rolls Test
RFH Program Ignition FOBIKs (2014-2017, PIN Code is required!)
RFH Erase Ignition FOBIKs (2014-2017, PIN Code is required!)
TPMS sensor # ID
ZF 8HP Quick Learn

Auto Headlamp On/Off Thresholds
Combined Rear Lights - EU/US Conversion
Front Fog Lamps Dropuot
Rear Fog Lights Configuration
Mirrors Configuration
Tire Size - Tire Circumference
Seat Belt Minder Enable/Disable
Headlamps Configuration

Vehicle Configuration Parameters

500+ editable BCM configuration parameters