Jeep Cherokee 2019-2022   ( KL )

The main Appcar DiagFCA features:
  • Read and clear DTC Fault codes
  • Read ECUs identification data
  • Read modules real-time data
  • Read vehicle configuration data
  • Edit / code vehicle configuration data
  • System tests / actuators
  • Perform calibration and adaptation routines
  • Build DTC fault codes and vehicle configuration reports

The support level, available modules and procedures may vary depending on the year and vehicles trim level.

⚠️ There are two CAN networks CAN-C and CAN-IHS in this vehicle.
To connect to modules in a CAN-IHS, you need a specific interface or an additional cross adapter.
👉 Read more how to connect to the specific CAN-bus
⚠️ 2018+ Jeep Cherokee is equipped with a Security Gateway Module (SGW). For active diagnostics and coding it is necessary to use an additional SGW Bypass Cable!

Supported Modules

ABS Anti Lock Brakes
ACC Adaptive Cruise Control
AFLS Adaptive Front Lighting System
AMP Amplifier
ANC Active Noise Cancelation
BCM Body Controller
CSWM Comfort Seat Wheel Module
DCU Dosing Control Unit
DDM Driver Door Module
DSM Display Screen Module
DTCM Drive Train Control Module
DTV Digital Television
EDM External Disc Module

EPB Electrical Parking Brake
EPS Electric Power Steering
ESL Electronic Steering Lock
ESM Electronic Shifter
FFCM Forward Facing Camera Module
HVAC Heat, Ventilation and A/C
ICS Integrated Center Stack
IPC Instrument Panel Cluster
LBSS Left Blind Spot Sensor
MSM Memory Seat Module
OCM Occupant Classification
ORC Occupant Restraint Air Bag
PAM Parking Aid Module

PCM Powertrain Control Module
PDM Passenger Door Module
PLGM Power Liftgate
PTU Power Transfer Unit
RBSS Right Blind Spot Sensor
RDM Rear Drive Module
RFH Radio Frequency Hub
SCCM Steering Column Control Module
SGW Security Gateway Module
TBM Telematic Box Module
TBM2 Global Telematics Box Module
TCM Transmission Control Module

Supported Procedures and Routines

ABS Longitudinal G-Sensor Calibration
ABS Bleed Brakes
EPS Learn
Proxi Configuration Alignment
Proxi Tools - Proxi Edit
HVAC Actuator Calibration

RFH Door Handle Verification Test
RFH LF Antenna Verification Test
RFH Locate Learned Keys
RFH Erase Ignition Fobik (5-digit PIN Code is required!)
RFH Program Ignition Fobik (5-digit PIN Code is required!)
RFH Immobilizer Antenna Test

PLGM Liftgate Calibration
Reset PTU Shift Counter
ORC Initialize
PCM Learn ETC - Throttle / Accelerator Pedal calibration
PCM Cam Crank Relearn
ZF 9HP Quick Learn
Rear Stop / Turn Lights Conversion US / EU

Vehicle Configuration Parameters

200+ editable BCM configuration parameters