Jeep Grand Cherokee 2005-2010   ( WK )

The main Appcar DiagFCA features:
  • Read and clear DTC Fault codes
  • Read ECUs identification data
  • Read modules real-time data
  • Read vehicle configuration data
  • Edit / code vehicle configuration data
  • System tests / actuators
  • Perform calibration and adaptation routines
  • Build DTC fault codes and vehicle configuration reports

The support level, available modules and procedures may vary depending on the year and vehicles trim level.

UK / RHD / Europe WH model and 3.0 diesel are also supported.

Supported Modules

ABS Anti Lock Brakes
AHBM Automatic High Beam
AHLM Headlamp Leveling
AMP Amplifier
CCN Instrument Cluster / Cabin Compartment Node
DDM Driver Door Module
EOM Electronic Overhead
ESM Electronic Shifter
FCMCGW Front Control / Central Gateway
FDCM Final Drive Control / All Wheel Drive
HFM Hands Free Module

HSM Heated Seat Module
HVAC Heat, Ventilation and A/C
ITM Intrusion
LRSM Light Rain Sensor Module
MSMD Memory Seat
OCM Occupant Classification
ORC Occupant Restraint Air Bag
PCM Powertrain Control Module
PDM Passenger Door Module
PTS Parktronics

SAS Steering Angle Sensor
SCM Steering Column
SDAR Satellite Radio
SDARV Satellite Video Receiver
SUNR Sunroof
TCM Transmission Control Module
TM Trailer
VES Vehicle Entertainment System
VES3 Last Row Screen
WCM Wireless / Ignition Control

Supported Procedures and Routines

ABS Bleed Brakes
ABS Initialize
CCN Customer Settings
CCN Self Test
HVAC Actuator Calibration
PCM Learn ETC - Throttle / Accelerator Pedal calibration (gasoline)
PCM DPF Manual Regeneration
PCM VIN Edit (gasoline)
PCM Cam Crank Relearn (gasoline)
MyGIG Radio - DVD Region Change Flag Reset
MyGIG Radio - HDD Backup
MyGIG Radio - 12/24h Clock Mode (EU market only)
MyGIG Radio - Anti-Theft CODE temporary disable
545RFE Transmission Clear Learned Variable Line Pressure (VLP) Counters - Shift Count In Open Loop
545RFE Transmission Clear Learned Variable Line Pressure (VLP) Counters - Open Loop Output Tooth Count

TCM NAG1 Initialize EGS
TCM NAG1 Store Learned Adaptives
TCM NAG1 Reset Learned Adaptives
TCM NAG1 EGS Configuration Edit
TPMS sensor ID #
WCM Erase All Ignition Keys
WCM Program Ignition Keys or Key FOBs
WCM Read PIN Code
WCM PCM Replace
WCM Reset WIN Configuration (FOBIK, 2008+)
WCM Replace (FOBIK, 2008+)
WCM PIN Reset (Marquardt Module only, not work with Siemens/Continental, 2009+)
WCM VIN Reset (Marquardt Module only, not work with Siemens/Continental, 2009+)

Accessory Delay Time
Combined Rear Lamps
Compass and Temperature Display
DRL - Day Running Lights
DVD Region Code (2008+)
Flash Lamps on Lock
Front Fog Lamps
Front Fog Lamps Dropout
Headlamp Delay Time
Horn Chirp Settings
Illuminated Approach Time
Mirrors Settings
Tilt Mirrors in Reverse
One Touch Lane Change
Headlamps Settings
Rear Back-up Camera (2006+)
Rear Fog Lamps Configuration
Remote Steering Wheel Switches
Tire Size - typing Tire Circumference
TPMS Tire Pressure Monitoring Enabled/Disabled
Anti-Theft VTA Alarm Configuration
Wipers Settings

Vehicle Configuration Parameters

200+ editable FCMCGW configuration parameters

DIY 🔹 Jeep Grand Cherokee WK 2005-2010